Updated runtime files.

runtime/doc/autocmd.txt

-*autocmd.txt*   For Vim version 7.3.  Last change: 2012 Jul 10
+*autocmd.txt*   For Vim version 7.3.  Last change: 2012 Sep 05
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -263,8 +263,10 @@ Name			triggered by ~
 	Startup and exit
 |VimEnter|		after doing all the startup stuff
 |GUIEnter|		after starting the GUI successfully
+|GUIFailed|		after starting the GUI failed
 |TermResponse|		after the terminal response to |t_RV| is received
 
+|QuitPre|			when using `:quit`, before deciding whether to quit
 |VimLeavePre|		before exiting Vim, before writing the viminfo file
 |VimLeave|		before exiting Vim, after writing the viminfo file
 
@@ -312,6 +314,7 @@ Name			triggered by ~
 |SessionLoadPost|	after loading a session file
 
 |MenuPopup|		just before showing the popup menu
+|CompleteDone|		after Insert mode completion is done
 
 |User|			to be used in combination with ":doautocmd"
 

runtime/doc/diff.txt

-*diff.txt*      For Vim version 7.3.  Last change: 2012 Aug 08
+*diff.txt*      For Vim version 7.3.  Last change: 2012 Sep 05
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -86,16 +86,16 @@ diff mode.  You could use a construct like this: >
 While already in Vim you can start diff mode in three ways.
 
 							*E98*
-:diffsplit {filename}					*:diffs* *:diffsplit*
+:diffs[plit] {filename}					*:diffs* *:diffsplit*
 		Open a new window on the file {filename}.  The options are set
 		as for "vimdiff" for the current and the newly opened window.
 		Also see 'diffexpr'.
 
 							*:difft* *:diffthis*
-:diffthis	Make the current window part of the diff windows.  This sets
+:difft[his]	Make the current window part of the diff windows.  This sets
 		the options like for "vimdiff".
 
-:diffpatch {patchfile}				 *E816* *:diffp* *:diffpatch*
+:diffp[atch] {patchfile}				 *E816* *:diffp* *:diffpatch*
 		Use the current buffer, patch it with the diff found in
 		{patchfile} and open a buffer on the result.  The options are
 		set as for "vimdiff".
@@ -123,9 +123,9 @@ Since the option values are remembered with the buffer, you can edit another
 file for a moment and come back to the same file and be in diff mode again.
 
 							*:diffo* *:diffoff*
-:diffoff	Switch off diff mode for the current window.
+:diffo[ff]	Switch off diff mode for the current window.
 
-:diffoff!	Switch off diff mode for the current window and in all windows
+:diffo[ff]!	Switch off diff mode for the current window and in all windows
 		in the current tab page where 'diff' is set.
 
 The ":diffoff" command resets the relevant options to their default value.

runtime/doc/eval.txt

-*eval.txt*	For Vim version 7.3.  Last change: 2012 Aug 02
+*eval.txt*	For Vim version 7.3.  Last change: 2012 Sep 05
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -759,7 +759,7 @@ of a |List| is different from the original |List|.  When using "is" without
 a |List| or a |Dictionary| it is equivalent to using "equal", using "isnot"
 equivalent to using "not equal".  Except that a different type means the
 values are different: "4 == '4'" is true, "4 is '4'" is false and "0 is []" is
-false and not a error. "is#"/"isnot#" and "is?"/"isnot?" can be used to match
+false and not an error. "is#"/"isnot#" and "is?"/"isnot?" can be used to match
 and ignore case.
 
 When comparing a String with a Number, the String is converted to a Number,
@@ -4635,8 +4635,8 @@ pyeval({expr})						*pyeval()*
 		Numbers and strings are returned as they are (strings are 
 		copied though).
 		Lists are represented as Vim |List| type.
-		Dictionaries are represented as Vim |Dictionary| type with 
-		keys converted to strings.
+		Dictionaries are represented as Vim |Dictionary| type, 
+		non-string keys result in error.
 		{only available when compiled with the |+python| feature}
 
 							*E726* *E727*
@@ -5253,8 +5253,9 @@ setreg({regname}, {value} [,{options}])
 
 		If {options} contains no register settings, then the default
 		is to use character mode unless {value} ends in a <NL>.
-		Setting the '=' register is not possible.
-		Returns zero for success, non-zero for failure.
+		Setting the '=' register is not possible, but you can use >
+			:let @= = var_expr
+<		Returns zero for success, non-zero for failure.
 
 		Examples: >
 			:call setreg(v:register, @*)

runtime/doc/hebrew.txt

@@ -93,7 +93,7 @@ Details
       This is also the keymap when 'keymap=hebrew' is set.  The advantage of
       'keymap' is that it works properly when using UTF8, e.g. it inserts the
       correct characters; 'hkmap' does not.  The 'keymap' keyboard can also
-      insert niqud and te`amim.  To see what those mappings are,look at the
+      insert niqud and te`amim.  To see what those mappings are, look at the
       keymap file 'hebrew.vim' etc.
 
 

runtime/doc/if_pyth.txt

@@ -159,6 +159,26 @@ vim.bindeval(str)					*python-bindeval*
 	   vimlist or vimdictionary python type that are connected to original 
 	   list or dictionary. Thus modifications to these objects imply 
 	   modifications of the original.
+
+	   Additionally, vimlist and vimdictionary type have read-write 
+	   `.locked` attribute that returns
+	     Value           Meaning ~
+	     zero            Variable is not locked
+	     vim.VAR_LOCKED  Variable is locked, but can be unlocked
+	     vim.VAR_FIXED   Variable is locked and can’t be unlocked
+	   integer constants. If variable is not fixed, you can do 
+	   `var.locked=True` to lock it and `var.locked=False` to unlock. 
+	   There is no recursive locking like |:lockvar|! does. There is also 
+	   no way to lock a specific key or check whether it is locked (in any 
+	   case these locks are ignored by anything except |:let|: |extend()| 
+	   does not care, neither does python interface).
+
+	   Vimdictionary type also supports `.scope` attribute which is one of
+	     Value              Meaning ~
+	     zero               Dictionary is not a scope one
+	     vim.VAR_DEF_SCOPE  Function-local or global scope dictionary
+	     vim.VAR_SCOPE      Other scope dictionary
+
 	2. if expression evaluates to a function reference, then it returns 
 	   callable vimfunction object. Use self keyword argument to assign 
 	   |self| object for dictionary functions.

runtime/doc/indent.txt

-*indent.txt*    For Vim version 7.3.  Last change: 2011 Sep 02
+*indent.txt*    For Vim version 7.3.  Last change: 2012 Aug 30
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -540,7 +540,7 @@ The examples below assume a 'shiftwidth' of 4.
 								*cino-star*
 	*N    Vim searches for unclosed comments at most N lines away.  This
 	      limits the time needed to search for the start of a comment.
-	      If your /* */ comments stop indenting afer N lines this is the
+	      If your /* */ comments stop indenting after N lines this is the
 	      value you will want to change.
 	      (default 70 lines).
 

runtime/doc/intro.txt

-*intro.txt*     For Vim version 7.3.  Last change: 2011 May 15
+*intro.txt*     For Vim version 7.3.  Last change: 2012 Sep 05
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -394,6 +394,8 @@ CTRL-{char}	{char} typed as a control character; that is, typing {char}
 							*quotecommandquote*
 "command"	A reference to a command that you can type is enclosed in
 		double quotes.
+`command`		New style command, this distinguishes it from other
+		quoted text and strings.
 
 					*key-notation* *key-codes* *keycodes*
 These names for keys are used in the documentation.  They can also be used

runtime/doc/todo.txt

-*todo.txt*      For Vim version 7.3.  Last change: 2012 Aug 15
+*todo.txt*      For Vim version 7.3.  Last change: 2012 Sep 21
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -36,6 +36,9 @@ not be repeated below, unless there is extra information.
 
 Go through more coverity reports.
 
+Ruby problem, patch in issue 49. (Sep 19)
+Also in email from Ondruch?
+
 Discussion about canonicalization of Hebrew. (Ron Aaron, 2011 April 10)
 
 GTK: problem with 'L' in 'guioptions' changing the window width.
@@ -43,12 +46,35 @@ GTK: problem with 'L' in 'guioptions' changing the window width.
 
 Checking runtime scripts: Thilo Six, 2012 Jun 6.
 
+Crash with 1023 byte directory name. (Danek Duvall, 2012 Sep 19)
+
+Patch for SGR mouse with older xterm. (Hayaki Saito, 2012 Sep 19)
+
+Patch for crash with an autocommand. (ZyX, 2012 Sep 6, second one)
+Also patch for garbage, but use vim_strncpy() instead.
+
+Patch to fix crash on Win32 when setting 'encoding'. (Jiri Sedlak, 2012 Sep
+12)
+
+Patch to update example using empty(). (ZyX, 2012 Sep 13)
+
 Javascript file where indent gets stuck on: GalaxyMaster, 2012 May 3.
 
+Updated French and Esperanto files. (Dominique Pelle, 2012 Aug 19)
+
+When showing diffs filler lines may be hidden at first.
+Patch by Christian Brabandt, 2012 Sep 6.
+
+Patch for memory leaks on exception. (ZyX, 2012 Sep 9)
+
 The CompleteDone autocommand needs some info passed to it:
 - The word that was selected (empty if abandoned complete)
 - Type of completion: tag, omnifunc, user func.
 
+mouse_sgr is not ordered alphabetically in :version output.
+Docs list mouse_urxvt as normal feature, should be big. (Hayaki Saito, 2012
+Aug 16)
+
 ":gundo" command: global undo.  Undoes changes spread over multiple files in
 the order they were made.  Also ":gredo".  Both with a count.  Useful when
 tests fail after making changes and you forgot in which files.
@@ -57,27 +83,45 @@ Win32: When a directory name contains an exclamation mark, completion doesn't
 complete the contents of the directory.  No escaping for the "!"? (Jan
 Stocker, 2012 Jan 5)
 
+Patch for IME handling, adds 'imactivatefunc' and 'imstatusfunc' option.
+(Yukihiro Nakadaira, 2012 Aug 16)
+Patch to improve IME handling. (Yasuhiro Matsumoto, 2012 Jul 18)
+
 Issue 54: document behavior of -complete, also expands arg.
 
+Patch for if_lua. (Luis Carvalho, 2012 Aug 26, update Aug 29, another Aug 30,
+then Sep 1)
+
 Issue 72: 'autochdir' causes problems for :vimgrep.
 
 MS-Windows: Crash opening very long file name starting with "\\".
 (Christian Brock, 2012 Jun 29)
 
+Win32: patch for current directory, "loading iof conv". (Ken Takata, 2012 Sep
+15)
+
 Syntax update problem in one buffer opened in two windows, bottom window is
 not correctly updated. (Paul Harris, 2012 Feb 27)
 
+Patch to add assignments in cscope. (Uli Meis, Estabrooks, 2012 Sep 1)
+Alternate patch by Gary Johnson, Sep 4.
+
 Patch to add getsid(). (Tyru, 2011 Oct 2)  Do we want this?  Update Oct 4.
 Or use expand('<sid>')?
 
-Patch to improve IME handling. (Yasuhiro Matsumoto, 2012 Jul 18)
-
 Patch for :tabcloseleft, after closing a tab go to left tab. (William Bowers,
 2012 Aug 4)
 
+Patch for Tab behavior with 'conceal'. (Dominique Pelle, 2012 Mar 18)
+Patch to test functionality of 'conceal' with tabs. (Simon Ruderich, 2012 Sep
+5)  Update with screencol() and screenrow() functions: Sep 7.
+
 Crash in autocmd that unloads buffers in a BufUnload event. (Andrew Pimlott,
 2012 Aug 11)  Disallow :new when BufUnload is being handled?
 
+MS-Windows ACL support doesn't work well.  Patch from Ken Takata, 2012 Aug 29.
+Update Aug 31.
+
 MS-Windows resizing problems:
 - Windows window on screen positioning: Patch by Yukihiro Nakadaira, 2012 Jun
   20.  Uses getWindowRect() instead of GetWindowPlacement()
@@ -94,6 +138,9 @@ The input map for CTRL-O in mswin.vim causes problems after CTRL-X CTRL-O.
 Suggestion for another map. (Philip Mat, 2012 Jun 18)
 But use "gi" instead of "a".  Or use CTRL-\ CTRL-O.
 
+Patch to support user name completion on MS-Windows. (Yasuhiro Matsumoto, 2012
+Aug 16)
+
 URXVT:
 - will get stuck if byte sequence does not containe expected semicolon.
 - Use urxvt mouse support also in xterm.  Explanations:
@@ -108,17 +155,23 @@ Do give the prompt? Quit with an error?
 
 Patch for 'backupcopy' default behavior for symlinks on Windows. (David Pope,
 2012 Mar 21, update Mar 31)
+With fix for memory leak: Ken Takata, 2012 Aug 24
 
 Patch to list user digraphs. (Christian Brabandt, 2012 Apr 14)
 
 Patch for input method status. (Hirohito Higashi, 2012 Apr 18)
 
+Patch to print the result of a :python command. (Maxim Philippov
+<philippovmi@gmail.com>, 2012 Aug 16)  Update Aug 17.
+
 Problem with winfixheight and resizing. (Yukihiro Nakadaira, 2011 Sep 17)
 Patch Sep 18.
 
 Patch for IME problems. Remove hacking code for old IM. (Yukihiro Nakadaira,
 2012 Jul 20)
 
+/[^\n] does match at a line break.  Expected to do the same as /.
+
 Patch for has('unnamedplus') docs. (Tony Mechelynck, 2011 Sep 27)
 And one for gui_x11.txt.
 
@@ -162,9 +215,6 @@ Patch to add ":py3do". (Lilydjwg, 2012 Apr 7)
 
 Plugin for Modeleasy. (Massimiliano Tripoli, 2011 Nov 29)
 
-When using remote-silent the -R flag is not passed on. (Axel Bender, 2012 May
-31)
-
 Updated syntax file for ssh_config, maintainer doesn't respond.
 (Leonard Ehrenfried, 2011 Sep 26)
 
@@ -725,10 +775,6 @@ Support a 'systemencoding' option (for Unix).  It specifies the encoding of
 file names. (Kikuchan, 2010 Oct 5).  Useful on a latin1 or double-byte Asian
 system when 'encoding' is "utf-8".
 
-Win32: A --remote command that has a directory name starting with a ( doesn't
-work, the backslash is removed, assuming that it escapes the (. (Valery
-Kondakoff, 2009 May 13)
-
 Win32 GUI: Changing manifest helps for dpi changes (Joe Castro, 2009 Mar 27)
 
 Win32 GUI: last message from startup doesn't show up when there is an echoerr
@@ -914,6 +960,15 @@ escaping characters where the backslash is not removed later.  Asked Chris for
 an alternate solution, also for src/ex_getln.c.
 This also fails when the file or directory name contains "%". (Thoml, 2008
 July 7)
+Using --remote-silent while the current directory has a # in the name does not
+work, the # needs to be escaped. (Tramblay Bruno, 2012 Sep 15)
+
+When using remote-silent the -R flag is not passed on. (Axel Bender, 2012 May
+31)
+
+Win32: A --remote command that has a directory name starting with a ( doesn't
+work, the backslash is removed, assuming that it escapes the (. (Valery
+Kondakoff, 2009 May 13)
 
 Problem with 'langmap' being used on the rhs of a mapping. (Nikolai Weibull,
 2008 May 14)

runtime/doc/usr_41.txt

@@ -1681,7 +1681,7 @@ in your plugin file!
 HEADER
 
 You will probably add new corrections to the plugin and soon have several
-versions laying around.  And when distributing this file, people will want to
+versions lying around.  And when distributing this file, people will want to
 know who wrote this wonderful plugin and where they can send remarks.
 Therefore, put a header at the top of your plugin: >
 

runtime/doc/visual.txt

@@ -66,7 +66,7 @@ position.
 			lines as used for the last Visual operation, but at
 			the current cursor position, multiplied by [count].
 			When the previous Visual operation was on a block both
-			the width and height of the block are multipiled by
+			the width and height of the block are multiplied by
 			[count].
 			When there was no previous Visual operation [count]
 			characters are selected.  This is like moving the

runtime/filetype.vim

 " Vim support file to detect file types
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2012 Aug 02
+" Last Change:	2012 Sep 06
 
 " Listen very carefully, I will say this only once
 if exists("did_load_filetypes")
@@ -1772,6 +1772,10 @@ func! SetFileTypeSH(name)
     " Some .sh scripts contain #!/bin/tcsh.
     call SetFileTypeShell("tcsh")
     return
+  elseif a:name =~ '\<zsh\>'
+    " Some .sh scripts contain #!/bin/zsh.
+    call SetFileTypeShell("zsh")
+    return
   elseif a:name =~ '\<ksh\>'
     let b:is_kornshell = 1
     if exists("b:is_bash")

runtime/ftplugin/changelog.vim

 " Vim filetype plugin file
 " Language:         generic Changelog file
 " Maintainer:       Nikolai Weibull <now@bitwi.se>
-" Latest Revision:  2011-05-02
+" Latest Revision:  2012-08-23
 " Variables:
 "   g:changelog_timeformat (deprecated: use g:changelog_dateformat instead) -
 "       description: the timeformat used in ChangeLog entries.
@@ -106,10 +106,10 @@ if &filetype == 'changelog'
 
   function! s:passwd_field(line, field)
     let fields = split(a:line, ':', 1)
-    if len(fields) < field
+    if len(fields) < a:field
       return ""
     endif
-    return fields[field - 1]
+    return fields[a:field - 1]
   endfunction
 
   function! s:capitalize(word)

runtime/ftplugin/zimbu.vim

 " Vim filetype plugin file
 " Language:	Zimbu
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2012 May 18
+" Last Change:	2012 Sep 08
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -34,7 +34,7 @@ setlocal errorformat^=%f\ line\ %l\ col\ %c:\ %m,ERROR:\ %m
 
 " When the matchit plugin is loaded, this makes the % command skip parens and
 " braces in comments.
-let b:match_words = '\(^\s*\)\@<=\(MODULE\|CLASS\|INTERFACE\|BITS\|ENUM\|SHARED\|FUNC\|REPLACE\|DEFINE\|PROC\|EQUAL\|MAIN\|IF\|GENERATE_IF\|WHILE\|REPEAT\|WITH\|DO\|FOR\|SWITCH\|TRY\)\>\|{\s*$:\(^\s*\)\@<=\(ELSE\|ELSEIF\|GENERATE_ELSE\|GENERATE_ELSEIF\|CATCH\|FINALLY\)\>:\(^\s*\)\@<=}\|\<UNTIL\>'
+let b:match_words = '\(^\s*\)\@<=\(MODULE\|CLASS\|INTERFACE\|BITS\|ENUM\|SHARED\|FUNC\|REPLACE\|DEFINE\|PROC\|EQUAL\|MAIN\|IF\|GENERATE_IF\|WHILE\|REPEAT\|WITH\|DO\|FOR\|SWITCH\|TRY\)\>\|{\s*$:\(^\s*\)\@<=\(ELSE\|ELSEIF\|GENERATE_ELSE\|GENERATE_ELSEIF\|CATCH\|FINALLY\)\>:\(^\s*\)\@<=\(}\|\<UNTIL\>\)'
 
 let b:match_skip = 's:comment\|string\|zimbuchar'
 
@@ -43,35 +43,22 @@ setlocal et sts=2 sw=2
 
 " Does replace when a dot, space or closing brace is typed.
 func! GCUpperDot(what)
-  let col = col(".") - strlen(a:what)
-  if v:char != ' ' && v:char != "\r" && v:char != "\x1b" && v:char != '.' && v:char != ')' && v:char != '}'
+  if v:char != ' ' && v:char != "\r" && v:char != "\x1b" && v:char != '.' && v:char != ')' && v:char != '}' && v:char != ','
     " no space or dot after the typed text
     let g:got_char = v:char
     return a:what
   endif
-  if col > 1 && getline('.')[col - 2] != ' '
-    " no space before the typed text
-    let g:got_char = 999
-    return a:what
-  endif
-  let synName = synIDattr(synID(line("."), col(".") - 2, 1), "name")
-  if synName =~ 'Comment\|String\|zimbuCregion\|\<c'
-    " inside a comment or C code
-    let g:got_char = 777
-    return a:what
-  endif
-    let g:got_char = 1111
-  return toupper(a:what)
+  return GCUpperCommon(a:what)
 endfunc
 
 " Does not replace when a dot is typed.
 func! GCUpper(what)
-  if v:char != ' ' && v:char != "\r" && v:char != "\x1b" && v:char != ')'
-    " no space after the typed text
+  if v:char != ' ' && v:char != "\r" && v:char != "\x1b" && v:char != ')' && v:char != ','
+    " no space or other "terminating" character after the typed text
     let g:got_char = v:char
     return a:what
   endif
-  return GCUpperDot(a:what)
+  return GCUpperCommon(a:what)
 endfunc
 
 " Only replaces when a space is typed.
@@ -81,17 +68,35 @@ func! GCUpperSpace(what)
     let g:got_char = v:char
     return a:what
   endif
-  return GCUpperDot(a:what)
+  return GCUpperCommon(a:what)
+endfunc
+
+func! GCUpperCommon(what)
+  let col = col(".") - strlen(a:what)
+  if col > 1 && getline('.')[col - 2] != ' '
+    " no space before the typed text
+    let g:got_char = 999
+    return a:what
+  endif
+  let synName = synIDattr(synID(line("."), col(".") - 2, 1), "name")
+  if synName =~ 'Comment\|String\|zimbuCregion\|\<c'
+    " inside a comment or C code
+    let g:got_char = 777
+    return a:what
+  endif
+    let g:got_char = 1111
+  return toupper(a:what)
 endfunc
 
 iabbr <buffer> <expr> alias GCUpperSpace("alias")
 iabbr <buffer> <expr> arg GCUpperDot("arg")
-iabbr <buffer> <expr> bad GCUpper("bad")
 iabbr <buffer> <expr> break GCUpper("break")
 iabbr <buffer> <expr> case GCUpperSpace("case")
 iabbr <buffer> <expr> catch GCUpperSpace("catch")
 iabbr <buffer> <expr> check GCUpperDot("check")
 iabbr <buffer> <expr> class GCUpperSpace("class")
+iabbr <buffer> <expr> interface GCUpperSpace("interface")
+iabbr <buffer> <expr> implements GCUpperSpace("implements")
 iabbr <buffer> <expr> shared GCUpperSpace("shared")
 iabbr <buffer> <expr> continue GCUpper("continue")
 iabbr <buffer> <expr> default GCUpper("default")

runtime/indent/zimbu.vim

 " Vim indent file
 " Language:	Zimbu
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2011 Jun 19
+" Last Change:	2012 Sep 08
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")
@@ -101,7 +101,7 @@ func GetZimbuIndent(lnum)
     endwhile
   endif
 
-  if prevline =~ '^\s*\(IF\|\|ELSEIF\|ELSE\|GENERATE_IF\|\|GENERATE_ELSEIF\|GENERATE_ELSE\|WHILE\|REPEAT\|TRY\|CATCH\|FINALLY\|FOR\|DO\|SWITCH\|CASE\|DEFAULT\|FUNC\|VIRTUAL\|ABSTRACT\|DEFINE\|REPLACE\|FINAL\|PROC\|MAIN\|NEW\|ENUM\|CLASS\|BITS\|MODULE\|SHARED\)\>'
+  if prevline =~ '^\s*\(IF\|\|ELSEIF\|ELSE\|GENERATE_IF\|\|GENERATE_ELSEIF\|GENERATE_ELSE\|WHILE\|REPEAT\|TRY\|CATCH\|FINALLY\|FOR\|DO\|SWITCH\|CASE\|DEFAULT\|FUNC\|VIRTUAL\|ABSTRACT\|DEFINE\|REPLACE\|FINAL\|PROC\|MAIN\|NEW\|ENUM\|CLASS\|INTERFACE\|BITS\|MODULE\|SHARED\)\>'
     let plindent += &sw
   endif
   if thisline =~ '^\s*\(}\|ELSEIF\>\|ELSE\>\|CATCH\|FINALLY\|GENERATE_ELSEIF\>\|GENERATE_ELSE\>\|UNTIL\>\)'

runtime/scripts.vim

 " Vim support file to detect file types in scripts
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last change:	2010 Sep 22
+" Last change:	2012 Aug 30
 
 " This file is called by an autocommand for every file that has just been
 " loaded into a buffer.  It checks if the type of file can be recognized by
@@ -198,7 +198,8 @@ else
     " - "=== ", line of "=", "---", "+++ " (SVK diff)
     " - "=== ", "--- ", "+++ " (bzr diff, common case)
     " - "=== (removed|added|renamed|modified)" (bzr diff, alternative)
-  elseif s:line1 =~ '^\(diff\>\|Only in \|\d\+\(,\d\+\)\=[cda]\d\+\>\|# It was generated by makepatch \|Index:\s\+\f\+\r\=$\|===== \f\+ \d\+\.\d\+ vs edited\|==== //\f\+#\d\+\)'
+    " - "# HG changeset patch" in first line (Mercurial export format)
+  elseif s:line1 =~ '^\(diff\>\|Only in \|\d\+\(,\d\+\)\=[cda]\d\+\>\|# It was generated by makepatch \|Index:\s\+\f\+\r\=$\|===== \f\+ \d\+\.\d\+ vs edited\|==== //\f\+#\d\+\|# HG changeset patch\)'
 	\ || (s:line1 =~ '^--- ' && s:line2 =~ '^+++ ')
 	\ || (s:line1 =~ '^\* looking for ' && s:line2 =~ '^\* comparing to ')
 	\ || (s:line1 =~ '^\*\*\* ' && s:line2 =~ '^--- ')

runtime/syntax/cl.vim

 " Vim syntax file
-" Language:		CL
-"			(pronounced alphabetically, and NOT known as Clever)
-"			(CL was created by Multibase, http://www.mbase.com.au)
+" Language:				CL
+" 					(pronounced alphabetically, and NOT known as Clever)
+" 					(CL was created by Multibase, http://www.mbase.com.au)
 " Filename extensions:	*.ent
-"			*.eni
+"					*.eni
 " Maintainer:		Philip Uren	<philuSPAX@ieee.org> Remove SPAX spam block
-" Version:              4
-" Last Change:		May 11 2012
+" Version:              5
+" Last Change:		Aug 16 2012
 
 " For version 5.x: Clear all syntax items
 " For version 6.x: Quit when a syntax file was already loaded
 if version < 600
-    syntax clear
+	syntax clear
 elseif exists("b:current_syntax")
-    finish
+	finish
 endif
 
 if version >= 600
-    setlocal iskeyword=@,48-57,_,-,
+	setlocal iskeyword=@,48-57,_,-,
 else
-    set iskeyword=@,48-57,_,-,
+	set iskeyword=@,48-57,_,-,
 endif
 
 syn case ignore
@@ -27,87 +27,87 @@ syn case ignore
 syn sync lines=300
 
 "If/else/elsif/endif and while/wend mismatch errors
-syn match   clifError	    "\<wend\>"
-syn match   clifError	    "\<elsif\>"
-syn match   clifError	    "\<else\>"
-syn match   clifError	    "\<endif\>"
+syn match	clifError	"\<wend\>"
+syn match	clifError	"\<elsif\>"
+syn match	clifError	"\<else\>"
+syn match	clifError	"\<endif\>"
 
-syn match   clSpaceError    "\s\+$"
+syn match	clSpaceError	"\s\+$"
 
 " If and while regions
-syn region  clLoop	transparent matchgroup=clWhile start="\<while\>" matchgroup=clWhile end="\<wend\>" contains=ALLBUT,clBreak,clProcedure
-syn region  clIf	transparent matchgroup=clConditional start="\<if\>" matchgroup=clConditional end="\<endif\>"   contains=ALLBUT,clBreak,clProcedure
+syn region	clLoop		transparent matchgroup=clWhile start="\<while\>" matchgroup=clWhile end="\<wend\>" contains=ALLBUT,clBreak,clProcedure
+syn region	clIf		transparent matchgroup=clConditional start="\<if\>" matchgroup=clConditional end="\<endif\>"   contains=ALLBUT,clBreak,clProcedure
 
 " Make those TODO notes and debugging stand out!
-syn keyword clTodo	contained   TODO BUG DEBUG FIX
-syn match   clNeedsWork	contained   "NEED[S]*\s\s*WORK"
-syn keyword clDebug	contained   debug
+syn keyword	clTodo		contained	TODO BUG DEBUG FIX
+syn match	clNeedsWork	contained	"NEED[S]*\s\s*WORK"
+syn keyword	clDebug		contained	debug
 
-syn match   clComment	"#.*$"	    contains=clTodo,clNeedsWork
-syn region  clProcedure	oneline	    start="^\s*[{}]" end="$"
-syn match   clInclude	"^\s*include\s.*"
+syn match	clComment	"#.*$"		contains=clTodo,clNeedsWork,@Spell
+syn region	clProcedure	oneline		start="^\s*[{}]" end="$"
+syn match	clInclude	"^\s*include\s.*"
 
 " We don't put "debug" in the clSetOptions;
 " we contain it in clSet so we can make it stand out.
-syn keyword clSetOptions    transparent aauto abort align convert E fill fnum goback hangup justify null_exit output rauto rawprint rawdisplay repeat skip tab trim
-syn match   clSet	"^\s*set\s.*" contains=clSetOptions,clDebug
+syn keyword	clSetOptions	transparent aauto abort align convert E fill fnum goback hangup justify null_exit output rauto rawprint rawdisplay repeat skip tab trim
+syn match	clSet		"^\s*set\s.*" contains=clSetOptions,clDebug
 
-syn match   clPreProc	"^\s*#P.*"
+syn match	clPreProc	"^\s*#P.*"
 
-syn keyword clConditional   else elsif
-syn keyword clWhile	continue endloop
+syn keyword	clConditional	else elsif
+syn keyword	clWhile		continue endloop
 " 'break' needs to be a region so we can sync on it above.
-syn region  clBreak	oneline start="^\s*break" end="$"
+syn region	clBreak		oneline start="^\s*break" end="$"
 
-syn match   clOperator	"[!;|)(:.><+*=-]"
+syn match	clOperator	"[!;|)(:.><+*=-]"
 
-syn match   clNumber	"\<\d\+\(u\=l\=\|lu\|f\)\>"
+syn match	clNumber	"\<\d\+\(u\=l\=\|lu\|f\)\>"
 
-syn region  clString	matchgroup=clQuote  start=+"+ end=+"+	skip=+\\"+
-syn region  clString	matchgroup=clQuote  start=+'+ end=+'+	skip=+\\'+
+syn region	clString	matchgroup=clQuote	start=+"+ end=+"+	skip=+\\"+ contains=@Spell
+syn region	clString	matchgroup=clQuote	start=+'+ end=+'+	skip=+\\'+ contains=@Spell
 
-syn keyword clReserved	ERROR EXIT INTERRUPT LOCKED LREPLY MODE MCOL MLINE MREPLY NULL REPLY V1 V2 V3 V4 V5 V6 V7 V8 V9 ZERO BYPASS GOING_BACK AAUTO ABORT ABORT ALIGN BIGE CONVERT FNUM GOBACK HANGUP JUSTIFY NEXIT OUTPUT RAUTO RAWDISPLAY RAWPRINT REPEAT SKIP TAB TRIM LCOUNT PCOUNT PLINES SLINES SCOLS MATCH LMATCH
+syn keyword	clReserved	ERROR EXIT INTERRUPT LOCKED LREPLY MODE MCOL MLINE MREPLY NULL REPLY V1 V2 V3 V4 V5 V6 V7 V8 V9 ZERO BYPASS GOING_BACK AAUTO ABORT ABORT ALIGN BIGE CONVERT FNUM GOBACK HANGUP JUSTIFY NEXIT OUTPUT RAUTO RAWDISPLAY RAWPRINT REPEAT SKIP TAB TRIM LCOUNT PCOUNT PLINES SLINES SCOLS MATCH LMATCH
 
-syn keyword clFunction	asc asize chr name random slen srandom day getarg getcgi getenv lcase scat sconv sdel skey smult srep substr sword trim ucase match
+syn keyword	clFunction	asc asize chr name random slen srandom day getarg getcgi getenv lcase scat sconv sdel skey smult srep substr sword trim ucase match
 
-syn keyword clStatement	clear clear_eol clear_eos close copy create unique with where empty define define ldefine delay_form delete escape exit_block exit_do exit_process field fork format get getfile getnext getprev goto head join maintain message no_join on_eop on_key on_exit on_delete openin openout openapp pause popenin popenout popenio print put range read redisplay refresh restart_block screen select sleep text unlock write and not or do
+syn keyword	clStatement	clear clear_eol clear_eos close copy create unique with where empty define define ldefine delay_form delete escape exit_block exit_do exit_process field fork format get getfile getnext getprev goto head join maintain message no_join on_eop on_key on_exit on_delete openin openout openapp pause popenin popenout popenio print put range read redisplay refresh restart_block screen select sleep text unlock write and not or do
 
 " Define the default highlighting.
 " For version 5.7 and earlier: only when not done already
 " For version 5.8 and later: only when an item doesn't have highlighting yet
-if  version >= 508 || !exists("did_cl_syntax_inits")
-    if	version < 508
-	let did_cl_syntax_inits = 1
-	command -nargs=+ HiLink hi link <args>
-    else
-	command -nargs=+ HiLink hi def link <args>
-    endif
-
-    HiLink clifError	Error
-    HiLink clSpaceError	Error
-    HiLink clWhile	Repeat
-    HiLink clConditional    Conditional
-    HiLink clDebug	Debug
-    HiLink clNeedsWork	Todo
-    HiLink clTodo	Todo
-    HiLink clComment	Comment
-    HiLink clProcedure	Procedure
-    HiLink clBreak	Procedure
-    HiLink clInclude	Include
-    HiLink clSetOption	Statement
-    HiLink clSet	Identifier
-    HiLink clPreProc	PreProc
-    HiLink clOperator	Operator
-    HiLink clNumber	Number
-    HiLink clString	String
-    HiLink clQuote	Delimiter
-    HiLink clReserved	Identifier
-    HiLink clFunction	Function
-    HiLink clStatement	Statement
-
-    delcommand HiLink
+if	version >= 508 || !exists("did_cl_syntax_inits")
+	if	version < 508
+		let did_cl_syntax_inits = 1
+		command -nargs=+ HiLink hi link <args>
+	else
+		command -nargs=+ HiLink hi def link <args>
+	endif
+
+	HiLink clifError	Error
+	HiLink clSpaceError	Error
+	HiLink clWhile		Repeat
+	HiLink clConditional	Conditional
+	HiLink clDebug		Debug
+	HiLink clNeedsWork	Todo
+	HiLink clTodo		Todo
+	HiLink clComment	Comment
+	HiLink clProcedure	Procedure
+	HiLink clBreak		Procedure
+	HiLink clInclude	Include
+	HiLink clSetOption	Statement
+	HiLink clSet		Identifier
+	HiLink clPreProc	PreProc
+	HiLink clOperator	Operator
+	HiLink clNumber		Number
+	HiLink clString		String
+	HiLink clQuote		Delimiter
+	HiLink clReserved	Identifier
+	HiLink clFunction	Function
+	HiLink clStatement	Statement
+
+	delcommand HiLink
 endif
 
 let b:current_syntax = "cl"
 
-" vim: ts=8 sw=4
+" vim: ts=8 sw=8

runtime/syntax/hgcommit.vim

 " Vim syntax file
 " Language:	hg (Mercurial) commit file
 " Maintainer:	Ken Takata <kentkt at csc dot jp>
-" Last Change:	2012 Aug 2
+" Last Change:	2012 Aug 23
 " Filenames:	hg-editor-*.txt
 " License:	VIM License
 " URL:		https://github.com/k-takata/hg-vim
@@ -10,12 +10,12 @@ if exists("b:current_syntax")
   finish
 endif
 
-syn match hgcommitComment "^HG:.*$"
-syn match hgcommitUser    "^HG: user: \zs.*$"   contained containedin=hgcommitComment
-syn match hgcommitBranch  "^HG: branch \zs.*$"  contained containedin=hgcommitComment
-syn match hgcommitAdded   "^HG: \zsadded .*$"   contained containedin=hgcommitComment
-syn match hgcommitChanged "^HG: \zschanged .*$" contained containedin=hgcommitComment
-syn match hgcommitRemoved "^HG: \zsremoved .*$" contained containedin=hgcommitComment
+syn match hgcommitComment "^HG:.*$"             contains=@NoSpell
+syn match hgcommitUser    "^HG: user: \zs.*$"   contains=@NoSpell contained containedin=hgcommitComment
+syn match hgcommitBranch  "^HG: branch \zs.*$"  contains=@NoSpell contained containedin=hgcommitComment
+syn match hgcommitAdded   "^HG: \zsadded .*$"   contains=@NoSpell contained containedin=hgcommitComment
+syn match hgcommitChanged "^HG: \zschanged .*$" contains=@NoSpell contained containedin=hgcommitComment
+syn match hgcommitRemoved "^HG: \zsremoved .*$" contains=@NoSpell contained containedin=hgcommitComment
 
 hi def link hgcommitComment Comment
 hi def link hgcommitUser    String

runtime/syntax/progress.vim

@@ -3,20 +3,20 @@
 " Filename extensions:	*.p (collides with Pascal),
 "			*.i (collides with assembler)
 "			*.w (collides with cweb)
-" Maintainer:		Philip Uren	    <philuSPAX@ieee.org> Remove SPAX spam block
-" Contributors:         Chris Ruprecht	    <chris@ruprecht.org>
-"			Philip Uren	    <philu@computer.org>
-"			Mikhail Kuperblum   <mikhail@whasup.com>
-"			John Florian	    <jflorian@voyager.net>
-" Version:              11
-" Last Change:		May 11 2012
+" Maintainer:		Philip Uren	<philuSPAX@ieee.org> Remove SPAX spam block
+" Contributors:         Chris Ruprecht	<chris@ruprecht.org>
+"					Philip Uren		<philu@computer.org>
+"					Mikhail Kuperblum	<mikhail@whasup.com>
+"					John Florian		<jflorian@voyager.net>
+" Version:              12
+" Last Change:		Aug 16 2012
 
 " For version 5.x: Clear all syntax item
 " For version 6.x: Quit when a syntax file was already loaded
 if version < 600
-    syntax clear
+	syntax clear
 elseif exists("b:current_syntax")
-    finish
+	finish
 endif
 
 let s:cpo_save = &cpo
@@ -34,7 +34,7 @@ set expandtab
 syn case ignore
 
 " Progress Blocks of code and mismatched "end." errors.
-syn match   ProgressEndError	    "\<end\>"
+syn match   ProgressEndError		"\<end\>"
 syn region ProgressDoBlock transparent matchgroup=ProgressDo start="\<do\>" matchgroup=ProgressDo end="\<end\>" contains=ALLBUT,ProgressProcedure,ProgressFunction
 syn region ProgressForBlock transparent matchgroup=ProgressFor start="\<for\>" matchgroup=ProgressFor end="\<end\>" contains=ALLBUT,ProgressProcedure,ProgressFunction
 syn region ProgressRepeatBlock transparent matchgroup=ProgressRepeat start="\<repeat\>" matchgroup=ProgressRepeat end="\<end\>" contains=ALLBUT,ProgressProcedure,ProgressFunction
@@ -44,20 +44,20 @@ syn region ProgressCaseBlock transparent matchgroup=ProgressCase start="\<case\>
 " and they could go in ProgressReserved,
 " but I found it more helpful to highlight them in a different color.
 syn keyword ProgressConditional	if else then when otherwise
-syn keyword ProgressFor		    each where
+syn keyword ProgressFor				each where
 
 " Make those TODO and debugging notes stand out!
-syn keyword ProgressTodo	    contained	TODO BUG FIX
-syn keyword ProgressDebug	    contained	DEBUG
+syn keyword ProgressTodo			contained	TODO BUG FIX
+syn keyword ProgressDebug			contained	DEBUG
 syn keyword ProgressDebug			debugger
 
 " If you like to highlight the whole line of
 " the start and end of procedures
 " to make the whole block of code stand out:
-syn match ProgressProcedure	"^\s*procedure.*"
-syn match ProgressProcedure	"^\s*end\s\s*procedure.*"
-syn match ProgressFunction	"^\s*function.*"
-syn match ProgressFunction	"^\s*end\s\s*function.*"
+syn match ProgressProcedure		"^\s*procedure.*"
+syn match ProgressProcedure		"^\s*end\s\s*procedure.*"
+syn match ProgressFunction		"^\s*function.*"
+syn match ProgressFunction		"^\s*end\s\s*function.*"
 " ... otherwise use this:
 " syn keyword ProgressFunction	procedure function
 
@@ -99,14 +99,14 @@ syn keyword ProgressReserved	window-maxim[ized] window-minim[ized] window-normal
 " Strings. Handles embedded quotes.
 " Note that, for some reason, Progress doesn't use the backslash, "\"
 " as the escape character; it uses tilde, "~".
-syn region ProgressString   matchgroup=ProgressQuote	start=+"+ end=+"+   skip=+\~'\|\~\~+
-syn region ProgressString   matchgroup=ProgressQuote	start=+'+ end=+'+   skip=+\~'\|\~\~+
+syn region ProgressString	matchgroup=ProgressQuote	start=+"+ end=+"+	skip=+\~'\|\~\~+ contains=@Spell
+syn region ProgressString	matchgroup=ProgressQuote	start=+'+ end=+'+	skip=+\~'\|\~\~+ contains=@Spell
 
 syn match  ProgressIdentifier		"\<[a-zA-Z_][a-zA-Z0-9_]*\>()"
 
 " syn match  ProgressDelimiter		"()"
 
-syn match  ProgressMatrixDelimiter  "[][]"
+syn match  ProgressMatrixDelimiter	"[][]"
 " If you prefer you can highlight the range:
 "syn match  ProgressMatrixDelimiter	"[\d\+\.\.\d\+]"
 
@@ -114,7 +114,7 @@ syn match  ProgressNumber		"\<\-\=\d\+\(u\=l\=\|lu\|f\)\>"
 syn match  ProgressByte			"\$[0-9a-fA-F]\+"
 
 " More values: Logicals, and Progress's unknown value, ?.
-syn match   ProgressNumber		"?"
+syn match   ProgressNumber				"?"
 syn keyword ProgressNumber		true false yes no
 
 " If you don't like tabs:
@@ -123,9 +123,9 @@ syn match ProgressShowTab "\t"
 " If you don't like white space on the end of lines, uncomment this:
 " syn match   ProgressSpaceError "\s\+$"
 
-syn region ProgressComment	start="/\*"  end="\*/" contains=ProgressComment,ProgressTodo,ProgressDebug
-syn region ProgressInclude	start="^[   ]*[{]" end="[}]" contains=ProgressPreProc,ProgressOperator,ProgressString,ProgressComment
-syn region ProgressPreProc	start="&" end="\>" contained
+syn region ProgressComment		start="/\*"  end="\*/" contains=ProgressComment,ProgressTodo,ProgressDebug,@Spell
+syn region ProgressInclude		start="^[ 	]*[{]" end="[}]" contains=ProgressPreProc,ProgressOperator,ProgressString,ProgressComment
+syn region ProgressPreProc		start="&" end="\>" contained
 
 " This next line works reasonably well.
 " syn match ProgressOperator        "[!;|)(:.><+*=-]"
@@ -277,7 +277,7 @@ syn keyword ProgressOperator	write-fragment write-message write-processing-instr
 syn keyword ProgressOperator	xml-data-type xml-node-name xml-node-type xml-schema-pat[h] xml-suppress-namespace-processing y y-of year year-offset yes-no
 syn keyword ProgressOperator	yes-no-cancel
 
-syn keyword ProgressType    char[acter] int[eger] int64 dec[imal] log[ical] da[te] datetime datetime-tz
+syn keyword ProgressType	char[acter] int[eger] int64 dec[imal] log[ical] da[te] datetime datetime-tz
 
 syn sync lines=800
 
@@ -285,40 +285,40 @@ syn sync lines=800
 " For version 5.7 and earlier: only when not done already
 " For version 5.8 and later: only when an item doesn't have highlighting yet
 if version >= 508 || !exists("did_progress_syntax_inits")
-    if version < 508
-	let did_progress_syntax_inits = 1
-	command -nargs=+ HiLink hi link <args>
-    else
-	command -nargs=+ HiLink hi def link <args>
-    endif
+	if version < 508
+		let did_progress_syntax_inits = 1
+		command -nargs=+ HiLink hi link <args>
+	else
+		command -nargs=+ HiLink hi def link <args>
+	endif
 
-    " The default methods for highlighting. Can be overridden later.
-    HiLink ProgressByte		    Number
-    HiLink ProgressCase		    Repeat
-    HiLink ProgressComment	    Comment
-    HiLink ProgressConditional	    Conditional
-    HiLink ProgressDebug		Debug
-    HiLink ProgressDo			Repeat
-    HiLink ProgressEndError	    Error
-    HiLink ProgressFor		    Repeat
-    HiLink ProgressFunction	    Procedure
-    HiLink ProgressIdentifier		Identifier
-    HiLink ProgressInclude	    Include
-    HiLink ProgressMatrixDelimiter  Identifier
-    HiLink ProgressNumber		Number
-    HiLink ProgressOperator	    Operator
-    HiLink ProgressPreProc	    PreProc
-    HiLink ProgressProcedure		Procedure
-    HiLink ProgressQuote		Delimiter
-    HiLink ProgressRepeat		Repeat
-    HiLink ProgressReserved	    Statement
-    HiLink ProgressSpaceError		Error
-    HiLink ProgressString		String
-    HiLink ProgressTodo		    Todo
-    HiLink ProgressType		    Statement
-    HiLink ProgressShowTab	    Error
+	" The default methods for highlighting. Can be overridden later.
+	HiLink ProgressByte		Number
+	HiLink ProgressCase		Repeat
+	HiLink ProgressComment		Comment
+	HiLink ProgressConditional	Conditional
+	HiLink ProgressDebug		Debug
+	HiLink ProgressDo		Repeat
+	HiLink ProgressEndError		Error
+	HiLink ProgressFor		Repeat
+	HiLink ProgressFunction		Procedure
+	HiLink ProgressIdentifier	Identifier
+	HiLink ProgressInclude		Include
+	HiLink ProgressMatrixDelimiter	Identifier
+	HiLink ProgressNumber		Number
+	HiLink ProgressOperator		Operator
+	HiLink ProgressPreProc		PreProc
+	HiLink ProgressProcedure	Procedure
+	HiLink ProgressQuote		Delimiter
+	HiLink ProgressRepeat		Repeat
+	HiLink ProgressReserved		Statement
+	HiLink ProgressSpaceError	Error
+	HiLink ProgressString		String
+	HiLink ProgressTodo		Todo
+	HiLink ProgressType		Statement
+	HiLink ProgressShowTab		Error
 
-    delcommand HiLink
+	delcommand HiLink
 endif
 
 let b:current_syntax = "progress"
@@ -326,4 +326,4 @@ let b:current_syntax = "progress"
 let &cpo = s:cpo_save
 unlet s:cpo_save
 
-" vim: ts=8 sw=4
+" vim: ts=8 sw=8

runtime/tutor/tutor.vim

 " Vim tutor support file
 " Author: Eduardo F. Amatria <eferna1@platea.pntic.mec.es>
 " Maintainer: Bram Moolenaar
-" Last Change:	2008 Jul 21
+" Last Change:	2012 Sep 21
 
 " This Vim script is used for detecting if a translation of the
 " tutor file exist, i.e., a tutor.xx file, where xx is the language.
@@ -72,14 +72,20 @@ if s:ext =~? '\.ko'
   endif
 endif
 
-" The Chinese tutor is available in two encodings, guess which one to use
+" The Chinese tutor is available in three encodings, guess which one to use
 " This segment is from the above lines and modified by
 " Mendel L Chan <beos@turbolinux.com.cn> for Chinese vim tutorial
+" When 'encoding' is utf-8, choose between China (simplified) and Taiwan
+" (traditional) based on the language, suggested by Alick Zhao.
 if s:ext =~? '\.zh'
   if &enc =~ 'big5\|cp950'
     let s:ext = ".zh.big5"
   elseif &enc != 'utf-8'
     let s:ext = ".zh.euc"
+  elseif s:ext =~? 'zh_tw' || (exists("s:lang") && s:lang =~? 'zh_tw')
+    let s:ext = ".zh_tw"
+  else
+    let s:ext = ".zh_cn"
   endif
 endif